The Journal of Health, Population and Nutrition icddr,b ISSN: 1606-0997 EISSN: 2072-1315 Vol. 25, Num. 4, 2007, pp. 436-447

Journal of Health, Population and Nutrition, Vol. 25, No. 4, December, 2007, pp. 436-447

Development and Management of a Geographic Information System for Health Research in a Developing-country Setting: A Case Study from Bangladesh

Jonathan D. Sugimoto¹, Alain B. Labrique¹, Salahuddin Ahmad², Mahbubur Rashid², Rolf D.W. Klemm¹, Parul Christian¹, Keith P. West, Jr¹.

¹Center for Human Nutrition, Department of International Health, Johns Hopkins Bloomberg School of Public Health, Room W2505, 615 North Wolfe Street, Baltimore, MD 21205, USA and ²JiVitA, House 63, Road 3, Karanipara, Rangpur, Bangladesh
All correspondence should be addressed to: (Reprints are not available from the authors) Dr. Alain B. Labrique Assistant Professor, Department of International Health, Program in Global Disease Epidemiology and Control, Johns Hopkins Bloomberg School of Public Health, 615 North Wolfe Street, W2505, Baltimore, MD 21205, USA, Email: alabriqu@jhsph.edu

Code Number: hn07058

ABSTRACT

In the last decade, geographic information systems (GIS) have become accessible to researchers in developing countries, yet guidance remains sparse for developing a GIS. Drawing on experience in developing a GIS for a large community trial in rural Bangladesh, six stages for constructing, maintaining, and using a GIS for health research purposes were outlined. The system contains 0.25 million landmarks, including 150,000 houses, in an area of 435 sq km with over 650,000 people. Assuming access to reasonably accurate paper boundary maps of the intended working area and the absence of pre-existing digital local-area maps, the six stages are: to (a) digitize and update existing paper maps, (b) join the digitized maps into a large-area map, (c) reference this large-area map to a geographic coordinate system, (d) insert location landmarks of interest, (e) maintain the GIS, and (f) link it to other research databases. These basic steps can produce a household-level, updated, scaleable GIS that can both enhance field efficiency and support epidemiologic analyses of demographic patterns, diseases, and health outcomes.

Key words: Geographic information systems; International health; Nutrition; Medical informatics; Community health research; Community mapping; Bangladesh

Introduction

A geographic information system (GIS) is a digital cartographic database containing the locations and characteristics of features within a geographic region, with additional data about events and conditions occurring at these locations. Over the past two decades, community health research has begun to adopt GIS for epidemiologic investigations. Primarily, these investigations have mapped and modelled the spatial occurrence of infectious (1-3) or non-infectious diseases (4-6) and their covariation with environmental risk factors (7-9). Less often, GIS has been used for modelling healthcare-seeking behaviours and preventable adverse health outcomes with distances to healthcare facilities and providers (10-12).

Most health research incorporating GIS has been conducted in higher-income countries (13,14) where digital, routinely-updated, geographically-referenced health data typically exist (15). Increasingly, studies in lower-income countries are incorporating GIS into their design (1-3,5-8,12), but rarely report more than a brief overview of the methods and equipment used during development (1,16-19). For example, Emch and colleagues describe the development of a medical GIS designed to interface with the Matlab demographic health surveillance system of ICDDR,B (20,21). A combination of satellite imagery, aerial photography, and field validation surveys was used for producing this GIS. Ali et al. reported the development of a GIS encompassing four peri-urban slums of Karachi, Pakistan (22), designed from satellite imagery and field validation surveys to study the epidemiology of vaccine-preventable diseases in urban South Asia. Hightower et al. described the construction of a GIS in rural Kenya-containing the locations of houses, roads, landmarks of interest, and the potential breeding sites of the malaria mosquito vector-using differential GPS survey techniques (23). Using radio communications equipment, professional-grade global positioning system (GPS) receivers, a personal computer, and vehicles, three surveyors developed a GIS for their 70-sq km study area in four months. These health studies which have incorporated GIS remain the exception, rather than the norm, as perceptions about high costs, technical complexity, and difficulty of use continue to prevent the widespread incorporation of GIS methods as standard field research tools.

There remains, therefore, a need for community health researchers to appreciate the steps involved in building and maintaining a basic research GIS, given recent hardware and software advances that have significantly increased user-friendliness and reduced costs. This report describes a framework for developing and maintaining a scaleable GIS, drawing on practical experiences in developing and applying a system in northern Bangladesh. The system was developed to serve a research trial site covering a 435-sq km rural area comprising one-fifth of the land mass of northwestern Gaibandha district and ~1% of adjacent Rangpur district, with an estimated population of 650,000 and a population density of ~1,500 per sq km (Fig. 1). The shape and size of the site emerged from the need to have a contiguous rural area, excluding urban and rural growth centres, with a population sufficient for a series of community randomized trials evaluating the effects of maternal and newborn nutritional supplementation on outcomes such as mortality and morbidity (The 'JiVitA Project' (24)). The first trial (JiVitA-1, Clinicaltrials. gov# NCT00198822), which began in mid-2001, was designed to evaluate the impact of weekly maternal vitamin A or beta-carotene supplementation on maternal and infant mortality, requiring a sample size of over 68,000 incident pregnancies followed through six months postpartum. A second, nested, trial (JiVitA-2, Clinicaltrials. gov# NCT00128557) aimed to assess the effect of vitamin A supplementation immediately after birth on reducing infant mortality by enrolling 25,000 newborn infants. These trials have maintained a pregnancy surveillance system which requires that each of ~150,000 houses be visited every five weeks by a team of 650 field workers. 

The large size of the project area, high density of population, and frequent contact with participants over an extended period of time required an efficient participant-tracking system, with a geographic component that would spatially relate and display addresses, other relevant points, e.g. field offices or healthcare facilities, and events of interest, e.g. pregnancies, births, and deaths. These requirements were readily met by converting and updating conventional paper maps with GIS technology. The steps between paper maps and a digital GIS are outlined below and can serve as a framework for other health researchers. The order and necessity of these steps, however, depend largely on the materials publicly available at the beginning of a new study.

Materials and Methods

A fully-operational GIS in northern rural Bangladesh was produced in six stages, namely, by (a) updating and digitizing existing paper maps; (b) joining the digitized maps into a single contiguous map of the project area, called a 'basemap'; (c) referencing this basemap to an accepted geographic coordinate system; (d) collecting and inserting the geographic locations of participant residences and other landmarks of potential interest; (e) continuously updating the GIS to reflect the dynamic nature of a free-living population; and (f) linking the GIS to research data to enhance project operations and optimize information capture. The six stages are described below.

Stage 1: Updating and digitizing existing paper maps

Obtaining paper maps: At the beginning of the JiVitA project, neither paper nor digital maps depicting the entire study area in sufficient detail were publicly available. The study area-mapping process, thus, began in 2000 with the purchase of 297 public-domain smaller, local-area land allocation paper maps drafted from aerial photographs taken during the early 1930s. These cadastral (land registry) maps were the result of extensive land-ownership surveys by the British Survey of India. Each 1:3960-scale map covers a land area of 0.5 to 4 sq km, including land plot numbers and boundaries, local roads and paths, streams, fields, and communities (e.g. neighbourhoods and villages with administrative boundaries as they existed at that time). Surprisingly, the land and political boundaries depicted on these 70-year old maps were sufficiently accurate to stitch together a contiguous study area map, serving as a foundation for the GIS.

Field validation survey: The paper maps were updated via an extensive field-validation survey conducted as part of a household enumeration census. Sixty-four trained two-member teams visited each house within the boundaries of a single British-era cadastral map sheet, enlarged by photocopying to facilitate field work. Each team assigned unique house numbers (addresses, required for study subject identification and follow-up), painted the numbers on robust household surfaces and recorded (not to scale) approximate house locations on the enlarged photocopies.New and updated locations of roads, rivers, and other landmarks, e.g. weekly market places, mosques, and clinics, were drawn on the paper maps using standardized map symbols. Supervisors resurveyed ~1% of the houses to verify assigned household locations and address-assignments. These maps, now containing approximate household locations as placeholders, allowed a smaller GPS-equipped team to conduct the GPS survey described below in stage 4.

Converting the paper maps to a digital format: At the same time as the field teams were updating the photocopied, enlarged maps, the original 297 cadastral maps were computer-scanned to a digital picture file format (TIFF Group 4) and converted to a line (vector) format using the digitizing tools of AutoCAD Map 2000 (Autodesk Inc., San Rafael, CA) and the automated tools of the AutoCAD extension, CAD Overlay 2000 (Autodesk Inc., San Rafael CA) (25) (Fig. 2). When the scanned copy of each map was imported into AutoCAD Map, the geographic scale was first defined using a scale bar in the map's legend. Administrative boundaries, e.g. villages, were automatically traced (vectorized) using CAD Overlay. Roads, rivers, and canals were manually traced using the standard AutoCAD Map drafting tools. We differentiated landmark types by storing each type in a separate colour-coded layer within a map's AutoCAD file. Once the hand-updated, photocopied paper maps were returned by the field survey teams, GIS technicians inserted houses and updated drawings of roads and rivers.

Stage 2: Joining the digitized maps into an area basemap

One utility of a GIS is the ability to display and analyze data on an extremely local-area scale (e.g. a cluster of morbidity at a village level or a specific field team's work area), but also on a wider large-area scale (e.g. a whole study area, comprising multiple clusters or worker catchment areas) which provides a wider context for localized or clustered events. This is only possible if the digital maps for each local area have been joined into a single map, known as a 'basemap'. For JiVitA, the 297 AutoCAD digitized local-area maps were pieced together using a two-phase, jigsaw-puzzle approach (Fig. 3). The local-area maps were first joined to form 19 union-level maps that were subsequently joined into a complete basemap of the study area. 

Rubbersheeting and cleaning: Each time adjacent maps were joined along their shared boundary using a process known as rubbersheeting and cleaning. Rubbersheeting is a non-linear adjustment algorithm (25) implemented by AutoCAD Map. One of the two maps being joined was designated the 'anchored map', unaltered, to which the second map's boundary was molded. Points along the boundary of the unanchored map were matched with corresponding locations along the boundary of the anchored map, forming pairs of points. The rubbersheeting algorithm molds the unanchored map to the anchored map by snapping the selected points along the boundary of the unanchored map to the corresponding point in the anchored map. The locations of the remaining features of the unanchored map were adjusted to maintain their position relative to each other. This can lead to slight geographic distortions in the second, unanchored map. We attempted to minimize these distortions by starting with a central local-area map of a larger area, e.g. Union, and rubbersheeting adjacent maps in circular layers, radiating out towards the edges of the larger area. During the rubbersheeting process, duplicate copies of boundary lines, road segments, point landmarks, river segments, and other map features (one copy from each of the two separate maps) were occasionally found along a shared boundary. We removed any duplicates, leaving a single feature on the central anchored map.

Editing the new basemap: To maximize the utility of road data in a GIS to guide field operations or for epidemiologic analyses, the lines representing roads should form a continuous network across local-area maps. Specifically, no gaps should exist between intersecting line segments. Many different scenarios had to be considered, and standard rules had to be decided upon for resolving conflicts consistently, such as joining roads and paths that spanned adjacent maps. For JiVitA, once all local-area maps had been joined into a single basemap, the line-gap detection functions of AutoCAD Map 2000 (33) were applied to intersecting road data to detect and fix any gaps.

After rubbersheeting and cleaning, the basemap was converted into a format compatible with ArcGIS ArcView (version 8.1, Environmental Systems Research Institute, Redlands, CA), a software that offers an intuitive editing interface for the background attribute data that describes each mapped landmark (e.g. feature type, length, and size).

Stage 3: Referencing the basemap to an accepted geographic coordinate system

An advantage of using a GIS over traditional, image-only maps is its capacity to efficiently integrate data from diverse sources-external and internal to a project-into a single system. Inserting data collected by GPS or other external sources into a basemap requires that all data points be stored in geographic coordinate systems that reference the same map datum (13). A geographic coordinate system is a two-dimensional grid that models the three-dimensional curvature of the surface of the earth. Each coordinate system is defined by its X (longitudinal) and Y (latitudinal) axes and a nearby 'map datum', which is a prominent geographic feature on the earth's surface relative to which all other X,Y-coordinates of the system are calculated (13). The nearest prominent geographic feature to our project area is Mt. Everest, so JiVitA GIS data are stored in a geographic (latitude/longitude) coordinate system (GCS) using the Everest 1830 map datum (26). For analyses requiring metres as a distance unit, the Bangladesh Transverse Mercator (BTM) projection (26) was employed. Since BTM references the same map datum as the chosen GCS, ArcGIS can seamlessly translate GIS data between the two systems.

Georeferencing the basemap using ground control points: Although most commercially-available GIS-ready basemaps are referenced against global geographic coordinates, a newly-created GIS basemap may need to be contextually situated on the Earth's surface, or georeferenced. Here, independently-measured geographic coordinates (e.g. obtained by GPS or external map sources) of prominent features in the study area-known as ground control points (GCPs)-are matched with their corresponding location on the project GIS maps. A non-linear adjustment algorithm (similar to the AutoCAD rubbersheeting algorithm) is applied to fit the rest of the basemap around this framework of GCPs (13). Adjusting the rubbersheeted basemap over a scaffolding of georeferenced GCPs also served to correct any warping caused by the stitching process.

Major road intersections were chosen as the GCPs to georeference the JiVitA basemap (Fig. 4). GPS receivers (Etrex Venture, Garmin International Inc., Olathe, KS) were used to collect the coordinates for these GCPs. A 2-by-2 km grid (chosen to balance accuracy and resource considerations) was overlaid on the basemap, and the nearest road intersection to the each grid point was selected as a GCP. Road size, permanence, and the accessibility of the intersection were also factored into our selection process. One of the authors (JS or SA) and an experienced member of the field staff of the Project surveyed each of these road intersections. Error of GPS measurement was minimized using the geometric mean of three measurements (mean measurement-to-GCP distance of 2.2 metres, standard deviation [SD]=3.0) taken at each location to represent the final coordinates for each corresponding GCP. Using the Spatial Adjustment extension in ArcGIS (version 8.3, Environmental Systems Research Institute, Redlands, CA), the GCP locations in the basemap were matched with and then snapped to their corresponding GPS-measured coordinate.

Fine-tuning the georeferencing: A scarcity of road-intersections (GCPs) near the boundaries of the project area can lead to distortions being introduced during the rubbersheeting process (Stage 2) that are not adequately adjusted near the perimeter of a project area. To minimize the effect of these distortions and enhance overall GIS accuracy, the locations of bridges, over which roads pass, were collected during a GPS survey of point landmarks (described below) and used in a second round of georeferencing. To do this, the nearest point along a road was moved to coincide with the GPS location of each bridge. Bridges located too far from any road segment (>150 m) were excluded from this process as data anomalies. Throughout this iterative process, all locations previously used as georeferencing points, including the GCPs, were defined as anchor points. To retain the integrity of preceding georeferencing adjustments, map features at these anchor points were not permitted to move. 

Stage 4: Adding residence and landmark locations to the GIS

To facilitate tracking of current and future community trial participants and accurately locate houses, all residences within the JiVitA Project area were surveyed using handheld GPS receivers (Etrex Venture, Garmin International Inc., Olathe KS). Other landmarks of environmental, social, public health and economic interest across the Project area were also surveyed by GPS at this time, added to the GIS, and overlaid onto the basemap to form the final JiVitA Project GIS (Fig. 5).

The GPS survey: During the construction of the JiVitA GIS, a small team of six surveyors and one supervisor employed preprinted household number lists, landmark location-recording forms, and handheld GPS receivers [A GPS receiver uses radio signals transmitted from four of 21 orbiting satellites to calculate, via trilateration, its location and elevation on the surface of the earth (27)] to visit and record the geographic coordinate of every house (~138,000) and point landmark of interest within the study area (~87,000). Point landmarks collected included health service providers, shops, mills, non-governmental organization offices, ponds, bridges, tubewells, and others (Table). For quality-control purposes, 2.0% of the total houses surveyed (n=2,710) were independently resurveyed by the team supervisor. Under 3% (n=77) of the resurveyed houses by the supervisor were different from the surveyor's measurements by >40 metres (>2 times our allowed positional inaccuracy limit of 20 metres, itself chosen due to the inherent 10-metre maximum resolution of our handheld units). Those so identified during the quality-control round were resurveyed.

Stage 5: Maintaining the GIS

Given the dynamic nature of rural community life, it may be desirable (if the uses of the GIS, personnel, and funds so allow) to maintain a developed GIS by regularly updating the addition, movement, and destruction of landmarks of interest,  especially the houses of study participants. Given the common use of impermanent house-construction materials (bamboo, thatch, mud, wood, and tin) in this area of Bangladesh, we expected and found a high rate of house turnover (new construction, house relocations, destroyed houses). On average, we see ~10,000 new houses built each year in this area of Bangladesh. Due to this high volume of change and the logistical limitations of working with such a large study area, the JiVitA GIS is continuously being updated, accurately reflecting the count and location of all landmarks, at most, two months behind reality. It is important when conducting spatial analyses to ensure that the location of an outcome and the spatial factors being related to that outcome (i.e. distance to facilities, source of infection, proximity to a main road) reflect the spatial location(s) at the time the outcome actually occurred. (e.g. An analysis of immunization campaign success rates by proximity to vaccine-delivery centres must have GIS data on household locations of children at the time the campaign was conducted, for best results.)

The Project has developed a two-phase GIS updating system that, in part, nests collection of house or landmark updates into the routine weekly data collection for existing field activities. First, new, moved, or destroyed houses or landmarks are reported on a weekly basis by the field staff of the Project through a vital events reporting system that is part of our ongoing trials. These field reports are entered into the Project database, and within a week, a list of new and moved houses scheduled to be surveyed is sent to the five-member, field-based GPS survey team. Using this list, a team member routinely visits each part of the study area every two months, using GPS receivers to record the current geographic location for the new and moved houses on the list. The resulting GPS data and completed lists are returned to the Project data-management centre and merged into the database, thereby updating the location of each house in the GIS.

Step 6: Linking and using the GIS database

The research utility of a GIS lies with its ability to link to other project databases (Fig. 6), providing a spatial dimension to otherwise 'flat' (non-geographic) participant health, socioeconomic and outcome data. We record the address (study-defined neighbourhood code, plus household number) of each participant at enrollment, or upon movement to another household, providing the database link between health-outcome data for each participant and the location of their household in the GIS. 

This linkage also allows the GIS to be used for increasing the efficiency of field research operations. For example, we built a simple GIS interface which allows data collectors to create GIS 'guide' maps or even upload the coordinates of houses scheduled for interviews into a handheld GPS. In rural settings where houses are often randomly placed in clusters of varying size, finding individual houses is a challenge for people from outside the community. The use of GPS resulted in a one to two-fold increase in time efficiency, which is cost-effective for high-level field workers, such as research physicians. The linkage also enhances the research capacity and scientific yield of a study, allowing the quantification of spatial relationships with the occurrence of disease, pregnancy outcomes, mortality, etc. That is, not only looking for spatial clusters or patterns in the location of certain types of outcome, but extending analytic capabilites to explore the effect of proximity to landmarks of public-health interest on outcomes and behaviours (e.g. the relationship between clinic location and treatment-seeking behaviour/postpartum care/pregnancy-related morbidity and mortality). The ability to also adjust for the potential influence of neighbours (e.g. spatial autocorrelation, or when a value at any point in space is dependent on values of surrounding points) in analyzing health outcomes is also a valuable benefit of a research GIS.

Discussion

Geographic information systems have the potential to be integral components of community-based health research and service-delivery programmes in low-income countries, providing spatial information to guide field operations and improve epidemiologic investigations. In recent years, although we have seen an increased number of studies using GIS to improve our understanding of the health epidemiology and disease dynamics (1,3,7,17,18,28,29-32,35), few have described in detail how GIS resources can be developed, organized, and maintained (20-23), especially under resource-poor, remote, or rural conditions.

As GPS and other digital cartographic technologies advance rapidly, there remains a basic need to describe and lay out the practical steps required to develop and use the GIS to support health research and delivery of services. In this report, we have described six basic stages of setting up and maintaining a GIS in a circumscribed rural area of northern Bangladesh, a setting for which no pre-existing digital maps were available. These stages represent our experiences in combining low-cost, state-of-the-art digital mapping tools with field research capabilities to create a GIS intended to improve operational efficiency, enhance participant tracking for longitudinal follow-up, and provide a new platform for geospatial investigation in community nutrition and health research. The stages we have described are broadly generalizable, although their direct utility to other settings will depend on many factors, including the size of the study area to be mapped, the level of detail needed (types of landmarks and coordinate precision), and the availability and quality of existing maps. Also important are the project's manpower, mobility, existing data-collection capabilities, and the level of sophistication of available computers, software, data entry, and management systems.

The above-described 'first stage'-to update and digitize existing maps-presupposes an availability of paper maps that are reasonably accurate with respect to scale and boundary definition. This requirement is often not met (36-38), leading to a need to draw detailed paper maps of a study area at the outset of a project that could later be digitized. Increasingly, remote-sensing products, e.g. satellite and aerial photography, are available to researchers and community programmes that, while usually of lower resolution and incomplete with regard to information required for a project, could be adapted for use as a basemap. When pre-existing scaled maps with acceptable boundaries are available, irrelevant or imprecise content can be 'removed' by only tracing desired lines, (e.g. roads and streams), and other features when digitizing these maps.  

The size of the project area and the number of smaller local-area maps determine the extent of rubbersheeting required. We were able to identify and purchase 297 local-area maps drawn seven decades ago from aerial photography, each representing a few square kilometres, from the Land Records Office of the Government of Bangladesh (at a cost of ~$4 each). These maps provided the basic size and boundary details for the JiVitA study area that, once verified and updated, contributed the basic structure of our GIS product. 

Georeferencing a project area map to a standard geographic coordinate system permits new GIS data obtained in-house, or from other agencies, e.g. United Nations Children's Fund, local or federal government sources, etc., to be superimposed accurately onto the project maps. Although we used road intersections as ground-control points (GCPs), any immobile feature that is identifiable on study maps and in the real world can be used for this purpose. Assuming these conditions, features that approximate a single geographic point, e.g. intersections of roads, offer the best options as GCPs.

Inserting and routinely updating locations of residences improve operational efficiency in the field by enabling supervisors, physicians, and other highly-skilled staff, who often need to cover large areas on motorcycle or bicycle, to rapidly find target houses for interviews and assessments. Typically, digitized maps can be printed daily or weekly for such staff, indicating homes to visit, outlining routes to travel, and providing locations of offices, clinics, and other features that can enhance field performance. Entering the geographic coordinates of health clinics, markets, and other community landmarks into the GIS maps subsequently enables spatial analysis of associations between health status, outcomes, and behaviours with location and use of healthcare and other facilities in the area. In JiVitA, we have also used the GIS for monitoring compliance and identifying clusters of high non-compliance for targeted community advocacy.

To use the GIS for research and operational analysis, features in this database should be linked to data of participants stored in other project databases. In a dynamically-updated environment, storing the geographic coordinates of point landmarks using the same relational database software can increase the efficiency of linking the GIS and project databases. These links can also be dynamically updated by defining them as simple queries, which are re-run as needed.

In addition, prior to using GIS-derived data for research analysis, geographic precision of the system must be accurately estimated. Although this step was not included with our six-stage process, preliminary estimates of the basemap and accuracy of the GPS survey were derived from GPS measurements of road intersections (n=7) and duplicate measurements of households (n=2,710) respectively. They were 30.3 metres (standard deviation [SD]=22.1) and 14.0 metres (SD=32.8) respectively. A more formal assessment of the accuracy of this system will need to be completed in the future. 

The building and maintenance of a GIS in resource-poor settings is now within reach of community-based research and intervention programmes in the developing world. Advances in user-friendly, inexpensive technology allow the incorporation of GIS as a tool to enhance science and implementation efficiency with minimum additional investment beyond the cost of setting up studies or intervention projects.

Acknowledgements

This research was funded by a Global Research Agreement (No. GHS-A-00-03-00019-00) between the Office of Health, Nutrition, and Infectious Diseases, United States Agency for International Development (USAID), Washington, DC, and the Center for Human Nutrition, Department of International Health, Johns Hopkins Bloomberg School of Public Health, Baltimore, MD and the Bill and Melinda Gates Foundation, Seattle, WA, USA. The study was conducted under the auspices of the National Integrated Health and Population Programme of the Ministry of Health and Family Welfare of the Government of Bangladesh. Additional support was received from the Sight and Life Research Institute, Baltimore, MD, USA; the Canadian Agency for International Development, Ottawa, Canada; the Nutrilite Health Institute, Access Business Group, Buena Park, CA, USA; and the USAID Mission, Dhaka, Bangladesh. The authors thank Andre Hackman and Darrel Mast for their invaluable assistance in supervising the digitizing and initial phases of building the JiVitA GIS basemap, and Allan Massie for technical support and assistance in building the programmes and database framework for the JiVitA GIS.

The authors also thank the members of the JiVitA Bangladesh GIS unit, Data Management Centre, investigative team, and 800 other staff who made possible the successful development of this GIS.

References

1. Bakker MI, Hatta M, Kwenang A, Faber WR, van Beers SM, Klatser PR et al. Population survey to determine risk factors for Mycobacterium leprae transmission and infection. Int J Epidemiol 2004;33:1329-36.
2. Cifuentes E, Hernandez JE, Venczel L, Hurtado M. Panorama of acute diarrhoeal diseases in Mexico. Health Place 1999;5:247-55. 
3. Clennon JA, King CH, Muchiri EM, Kariuki HC, Ouma JH, Mungai P et al. Spatial patterns of urinary schistosomiasis infection in a highly endemic area of coastal Kenya. Am J Trop Med Hyg 2004;70:443-8.
4. Fukuda Y, Umezaki M, Nakamura K, Takano T. Variations in societal characteristics of spatial disease clusters: examples of colon, lung and breast cancer in Japan. Int J Health Geogr 2005;4:16.
5. Lam NS. Geographical patterns of cancer mortality in China. Soc Sci Med 1986;23:241-7.
6. Molesworth AM, Harrison R, Theakston RD, Lalloo DG. Geographic information system mapping of snakebite incidence in northern Ghana and Nigeria using environmental indicators: a preliminary study. Trans R Soc Trop Med Hyg 2003;97:188-92.
7. Bavia ME, Hale LF, Malone JB, Braud DH, Shane SM. Geographic information systems and the environmental risk of schistosomiasis in Bahia, Brazil. Am J Trop Med Hyg 1999;60:566-72.
8. Hakre S, Masuoka P, Vanzie E, Roberts DR. Spatial correlations of mapped malaria rates with environmental factors in Belize, Central America. Int J Health Geogr 2004;3:6.
9. Kaminska IA, Oldak A, Turski WA. Geographical information system (GIS) as a tool for monitoring and analysing pesticide pollution and its impact on public health. Ann Agric Environ Med 2004;11:181-4.
10. Arcury TA, Gesler WM, Preisser JS, Sherman J, Spencer J, Perin J. The effects of geography and spatial behavior on health care utilization among the residents of a rural region. Health Serv Res 2005;40:135-55.
11. Ashton CM, Petersen NJ, Souchek J, Menke TJ, Yu HJ, Pietz K et al. Geographic variations in utilization rates in Veterans Affairs hospitals and clinics. N Engl J Med 1999;340:32-9.
12. Rosero-Bixby L. Spatial access to health care in Costa Rica and its equity: a GIS-based study. Soc Sci Med 2004;58:1271-84.
13. Cromley EK, McLafferty SL. GIS and public health. New York, NY: Guilford Press, 2002. 340 p.
14. Khan OA, Skinner R, editors. Geographic information systems and health applications. Hershey, PA: Idea Group Publishing, 2003. 325 p.
15. Marx RW. The TIGER system: automating the geographic structure of the United States census. Gov Publ Rev 1986;13:182-201.
16. Barbosa CS, Araujo KC, Antunes L, Favre T, Pieri OS. Spatial distribution of schistosomiasis foci on Itamaraca Island, Pernambuco, Brazil. Mem Inst Oswaldo Cruz 2004;99(Suppl 1):79-83.
17. Cecere MC, Vazquez-Prokopec GM, Gurtler RE, Kitron U. Spatio-temporal analysis of reinfestation by Triatoma infestans (Hemiptera: Reduviidae) following insecticide spraying in a rural community in northwestern Argentina. Am J Trop Med Hyg 2004;71:803-10.
18. Chadee DD, Kitron U. Spatial and temporal patterns of imported malaria cases and local transmission in Trinidad. Am J Trop Med Hyg 1999;61:513-7. 
19. Entwisle B, Rindfuss RR, Walsh SJ, Evans TP, Curran SR. Geographic information systems, spatial network analysis, and contraceptive choice. Demography 1997;34:171-87.
20. Ali M, Emch M, Ashley C, Streatfield PK. Implementation of a medical geographic information system: concepts and uses. J Health Popul Nutr 2001;19:100-10. 
21. Emch M. Diarrheal disease risk in Matlab, Bangladesh. Soc Sci Med 1999;49:519-30. 
22. Ali M, Rasool S, Park JK, Saeed S, Ochiai RL, Nizami Q et al. Use of satellite imagery in constructing a household GIS database for health studies in Karachi, Pakistan. Int J Health Geogr 2004;3:20. 
23. Hightower AW, Ombok M, Otieno R, Odhiambo R, Oloo AJ, Lal AA et al. A geographic information system applied to a malaria field study in western Kenya. Am J Trop Med Hyg 1998;58:266-72. 
24. West KP, Jr., Christian P, Klemm R, Labrique A, Rashid M, Shamim AA et al. (JiVitA Bangladesh Project). The JiVitA Bangladesh Project: research to improve nutrition and health among mothers and infants in rural South Asia. Sight Life Newslett 2006;1:10-4.
25. Vance D, Eisenberg R, Walsh D. Inside AutoCAD Map 2000. 3d ed. New York, NY: OnWord Press, 2000. 611 p.
26. Water Resources Planning Organization. Datum and map projections for GIS and GPS applications in Bangladesh. Dhaka: Environmental and GIS Support Project, 2005. (Report no. 10).
27. Spencer J, Frizzelle BG, Page PH, Wogler JB. Global positioning system: a field guide for the social sciences. 1st ed. Malden, MA: Blackwell Publishing, 2003. 218 p.
28. Ali M, Emch M, Tofail F, Baqui AH. Implications of health care provision on acute lower respiratory infection mortality in Bangladeshi children. Soc Sci Med 2001;52:267-77.
29. Barcellos C, Sabroza PC. The place behind the case: leptospirosis risks and associated environmental conditions in a flood-related outbreak in Rio de Janeiro. Cad Saude Publica 2001;17(Suppl):59-67.
30. Abdel-Rahman MS, El-Bahy MM, Malone JB, Thompson RA, El Bahy NM. Geographic information systems as a tool for control program management for schistosomiasis in Egypt. Acta Trop 2001;79:49-57.
31. Buitrago J, Rada M, Hernandez H, Buitrago E. A single-use site selection technique, using GIS, for aquaculture planning: choosing locations for mangrove oyster raft culture in Margarita Island, Venezuela. Environ Manage 2005;35:544-56.
32. Deshpande K, Ravi Shankar, Diwan V, Lonnroth K, Mahadik VK, Chandorkar RK. Spatial pattern of private health care provision in Ujjain, India: a provider survey processed and analysed with a geographical information system. Health Policy 2004;68:211-22.
33. Noor AM, Gikandi PW, Hay SI, Muga RO, Snow RW. Creating spatially defined databases for equitable health service planning in low-income countries: the example of Kenya. Acta Trop 2004;91:239-51.
34. Srivastava A, Nagpal BN, Saxena R, Eapen A, Ravindran KJ, Subbarao SK et al. GIS based malaria information management system for urban malaria scheme in India. Comput Methods Programs Biomed 2003;71:63-75.
35. Wilkinson D, Tanser F. GIS/GPS to document increased access to community-based treatment for tuberculosis in Africa. Geographic information system/global positioning system. Lancet 1999;354:394-5.
36. Vitamin A supplementation in northern Ghana: effects on clinic attendances, hospital admissions, and child mortality. Ghana VAST Study Team. Lancet 1993;342:7-12.
37. Sommer A, Tarwotjo I, Djunaedi E, West KP, Jr., Loeden AA, Tilden R et al. Impact of vitamin A supplementation on childhood mortality. A randomised controlled community trial. Lancet 1986;1:1169-73.
38. West KP, Jr., Pokhrel RP, Katz J, LeClerq SC, Khatry SK, Shrestha SR et al. Efficacy of vitamin A in reducing preschool child mortality in Nepal. Lancet 1991;338:67-71.

© 2007 ICDDR,B: Centre for Health and Population Research

The following images related to this document are available:

Photo images